Investment in the future
In recent years, we have invested more than 10 million euros in the future of our company,
in order to ensure all-round growth and further development. We have developed planning and action strategies that
are fit for purpose, not only in the present, but also in the future.
The building complex which was extended in 2019, provides more production and office space.
Dallmer products remain very much in demand; above all the increasing popularity of the level-access shower has pushed the sales figures up. For us this means: we need more machines, more employees and it is thus time for another new build – this one will be annex no. 5. The new building provides 500 m2 of production space on the ground floor and 700 m2 of office space on the upper floor, where part of the administration is housed. The employees here enjoy modern architecture which uses generous glazing and open design to create a transparent atmosphere and encourage communication.
Planning for tomorrow today.
Dallmer has acquired three machines for its metal production; two milling machines and a water-jet cutter The machines will be operated by five new employees who were hired specifically for this purpose.
Due to the sharp rise in demand, Dallmer is expanding its premises: we have bought an adjacent 20,000 m2 piece of land for the purpose of building a new shipping and logistics centre. This will give Dallmer an additional 4,000 m2 hall space with a 50 m long bridge connecting the old and new hall.
100 years of Dallmer
A lot has happened in the last 100 years: we have completely changed our core business, given design the level of priority
it deserves and revolutionised the drainage of level-access showers.
And we see that as our incentive to continue what we do well for the next 100 years – no resting on our laurels for us.
Johannes Dallmer speaks at the anniversary celebration "100 years of Dallmer".
Dallmer has now been established for 100 years and is more active than ever. Of all the innovations, the CeraWall drainage systems are attracting particular attention. That is because it is the first surface drainage system to separate the shower channel from the drain and enable surface drainage.
Dallmer continues to expand – geographically, technically and in terms of human resources. We open new agencies abroad,
invest in new production facilities, launch new innovations on the market
which, above all, will forever change the face of drainage level-access showers,
and management welcomes two new members.
Yvonne Dallmer presents the TistoPlan drain at SHK 2012 in Essen.
Dallmer installs the company's largest injection moulding machine to date with large-scale production capacity and the latest energy-efficiency technology.
New moulded parts for drain points with bonded waterproofing is launched under the "Tisto" brand
Harry Bauermeister is appointed Managing Director. Having joined Dallmer in 1993, the graduate engineer became a senior manager with executive powers in 2000 and has since been involved in numerous operational and strategic decisions.
Dallmer launches a new generation of roof drains and overflows on the market. Tailored to the requirements of planners, they enable gravity drainage and pressure pipe drainage that conforms to the very latest technology.
With CeraLine, Dallmer ushers in a new era in drainage for level-access showers.
At the end of 2008, Yvonne Dallmer is the 4th generation of the family to join the company. After working several years in Spain and America, Yvonne, a graduate in business administration returned to Sauerland to join the company management team.
Dallmer continues to produce innovative products for the level-access shower market, including the successful and multi-award-winning CeraLine shower channel. Dallmer is the first manufacturer to offer a shower channel for the drainage of level-access showers.
Dallmer celebrates its 90th anniversary. Numerous innovations are market-ready, including fire protection systems and electronic urinal controls.
Dallmer has 14 agencies in Germany, while further agencies and delivery warehouses in numerous countries around the globe ensure a strong growth in exports.
The basic structure of our product range is long-established: technically mature and well-designed solutions for good
drainage both in and around the property. We are continuously expanding our offering, whereby
our products are a perfect blend of design and functionality – and the results show that we are on the right track:
products from Dallmer – technologically and aesthetically superior.
The first Dallmer catalogue
Development of the CeraDrain® system for bonded waterproofing. These new drains make it much easier for installation engineers to install level-access showers, allowing them to dispense with conventional shower trays. The level-access shower begins its triumphant sweep through the bathroom world.
Dallmer receives its first design awards. Many more awards will follow. Some ten years later, Dallmer triggers a worldwide trend with its design grating.
Publication of the first product catalogue containing 14 product groups ranging from tubular traps to roof and balcony drains to plastic flooring.
Foray into the world of clogs
Helmuth Dallmer's greatest passion was horses. When his horse fell ill with
laminitis, it was a formative experience, sending him on a long heart-felt search for
an animal-friendly alternative to the horseshoe.
Helmuth Dallmer developed the Dallmer Clog
The Dallmer clog goes into production. All models adhere to the following principle: glue instead of nails! They are also all made of plastic instead of iron. Both of which meet the needs of horses that go barefoot or have hoof problems.
How we became what we are today
Dallmer has already developed extensive expertise in the manufacture of a wide range of plastic products.
At the start of the 1960s, the decision is made to change the company's core business for good:
Dallmer very successfully switches to drainage technology.
Production at Dallmer in the 1970s
Dipl.-Ing. Johannes Dallmer (3rd generation) joins the company. Johannes begins his career as a qualified engraver and then completes an engineering degree majoring in plastic process engineering, thus forging a link between the historical beginnings of the company and its future in the drainage industry. As a technophile engineer, he also brings along his passion for large, high-precision machines. Because one thing is clear: high-quality products can only be produced with high-quality production tools.
Construction of the current company premises in Arnsberg-Hedringen. The number of employees quickly grows to more than 100, expansion of equipment and machinery and sales in Germany and abroad.
Dallmer's core business is now sanitary technology, first industrially manufactured floor drains and plastic drain sets.
These days, Dallmer is renowned as the expert for drainage technology, but it all began quite differently.
Johannes Dallmer Snr initially established an engraving workshop...
How it all began: the first Dallmer workshop
Production of the first plastic items, such as handles, knobs and plinths for bread and roll roasters. The product range is then expanded to include the manufacture of tubes, connectors, trap inserts and floor drains, initially made with polyethylene, later with polypropylene.
Takeover and continuation of the company by Johannes Dallmer's son Helmuth Dallmer (2nd generation), born in 1923. Production of, among other things, printing rollers for wall coverings and induction-hardened steel rollers for the production of doilies
Founding of the Dallmer company by master engraver Johannes Dallmer Snr in Neheim, now Arnsberg, Sauerland. The company produced stamps, dies and embossing tools and carried out fine engraving on lamps.
Drainage by design.
c/o Seago and Stopps Limited
61 Station Road
Sudbury, Suffolk CO 10 2 SP
Co. Reg. No.: 03235118